GENOS M560-V
With OSP P300M
מכונת כרסום, מרכז עיבוד ורטיקלי M-560V OSP-P20M תוצרת OKUMA, טיוואן
- Main spindle motor VAC22/18.5 kW (10 min./cont.)
- Main spindle NT40 (dia. 70mm)
- Main spindle speed, 50 - 12,000min-1, Max Torque : 199N-m
- Rapid traverse speed: 40m/min. in X /Y-axis and 32m/min. in Z-axis
- Cutting feedrate: max. 32m/min.
- Tool unclamp package
- Coolant supply system, 230L (Effective 120L) tank and 0.25kW pump motor
- ATC air blower
- ATC specification: MAS BT40 + JIS Special pull stud
- Chip air blower, nozzle type
- Screw type chip conveyor, 0.1kw x 2pcs
- Chip pan
- Status indicator lamp, 2-layer type (Blue: Operation end lamp / Yellow: Alarm lamp)
- Foundation washers
- 32-tool ATC
- Totally enclosed guard (CE mark application)
- Through-the-spindle coolant supply system, middle pressure 1.5MPA / 20L/min / BT40 (Pullstud bolt std.: JIS)
- Mayfran Lift up type chip conveyor, floor type hight:1000mm (hinged conveyor) Side chip disposal (Prepared by OEG as retrofit)
- Spindle head cooling with oil controller
- Tool breakage detection / Auto tool length compensation by touch sensor
- Pre-arr. for Auto zero offset / Auto gauging by Renishaw touch probe (Not incl. Renishaw touch probe itself)
- CE-mark /EMC
- IEC regulation
- OSP-P300M CNC Controller with 12" colour display, XGA panel
- OSP-P300M Advanced One touch IGF-E kit specifications
- Auto program schedule update
- Work coordinate system selection, 100 sets
- Helical cutting function
- Synchronized tapping II
- Programmable travel limit
- Arbitrary angle chamfering
- 200 sets each of tool length offset and cutter radius compensation
- Tool life management function
- Auto power shutoff function
- Sequence stop
- Advanced One Touch IGF M
- Real 3D simulation function
- Program storage capacity, 2GB in tape length
- Simple load monitor
- NC operation monitor
- Advanced One touch IGF PC-cersion "Single machine type for basic 3axis model"
TAS-S
TAS-C
Electrical Power Source Application to suite local power source at each countries (CE transformer)
The specifications and descriptions in this Euro Standard are subject to change without notice.
| Max Machining Volume | mm | 1,050x560x460 |
| Table Size | mm | 560x1300 |
| Spindle Speed | min⁻¹ | 50~12,000 |
| Spindle Motor Power | kW (hp) | 22/18.5 (30/25) |
| Magazine Capacity | 32 Tools | |
| Machine Weight | Kg | 7,700 |
