MB-46VA

With OPS- P300M

• Main spindle motor VAC11/7.5 kW (10 min./cont.)

• Main spindle NT40 (dia. 70mm)
• Main spindle speed, 50 - 8,000min-1, Max Torque : 198N-m
• Rapid traverse speed: 40m/min. in X / Y-axis and 32m/min. in Z-axis
• Cutting feedrate: max. 32m/min.
• Hydraulic power unit
• Coolant supply system, 170L (Effective 100L) tank and 0.25kW pump motor
• ATC air blower
• ATC specification: MAS BT40 + JIS Special pull stud
• Chip air blower, nozzle type
• Screw type chip conveyor, 0.1kw x 2pcs
• Chip pan
• Status indicator lamp, 2-layer type (Blue: Operation end lamp / Yellow: Alarm lamp)
• Foundation washers
• 20-tool ATC
• Totally enclosed guard (CE mark application)
• Through-the-spindle coolant supply system, middle pressure 1.5MPA / 20L/min / BT40 (Pullstud bolt std.: JIS)
• Remark: After #0135 machines,above spec are standard. But until #0134 machines are 1.5MPA/12L/min .
• Pre-arrange for Lift-up chip conveyor floor type (incl. Harting socket for Mayfran & standard chip pan) Pre-arrange Chip Conveyor M-A type
• Remark: After Feb/02 prod machines,above spec are standard. But until Jan/02 prod machines are not including any Harting socket & I/F.
• Spindle head cooling with oil controller
• CE-mark /EMC
• IEC regulation
• OSP-P300M CNC Controller with 15" colour display, touch panel
• OSP-P300M 3D-E kit specifications
• Auto program schedule update
• Work coordinate system selection, 100 sets
• Helical cutting function
• Synchronized tapping II
• Programmable travel limit
• Arbitrary angle chamfering
• 200 sets each of tool length offset and cutter radius compensation
• Tool life management function
• Auto power shutoff function
• Sequence stop
• 3D simulation function
• Interactive MAP function (I-MAP)
• Program storage capacity, 2GB in tape length
• Simple load monitor
• NC operation monitor

TAS-S
TAS-C
Electrical Power Source Application to suite local power source at each countries (CE transformer)

Comparison Sheet
Remark 1: VA VAE
X-axis (Ram Saddle R/L) 560mm 762mm
Table size 760 x 460 mm 1,000 x 460 mm
Max loading capacity 500 kg 700 kg
Floor space (LxW) 1,900 x 2,700 mm 2,160 x 2,700 mm
Machine weight 6,000 kg 6.,500 kg

The specifications and descriptions in this Euro Standard are subject to change without notice.